How to Activate Sound In Safe Mode with a Simple Registry Download
Safe mode is a diagnostic mode of Windows that allows you to troubleshoot various problems with your PC. However, in safe mode, many features and drivers are disabled by default, including the sound driver. This means that you won't be able to hear any audio in safe mode, which can be frustrating if you want to watch a video, listen to music, or use voice chat.
Fortunately, there is a way to activate sound in safe mode with a simple registry download. This download will modify the Windows registry to enable the Windows Audio service and the Plug and Play service in safe mode. These services are responsible for managing the sound devices and drivers on your PC.
In this article, we will show you how to download and use this registry file to activate sound in safe mode. We will also explain how to undo the changes if you want to restore the default settings of safe mode.
How to Download and Use the Registry File to Activate Sound In Safe Mode
Before you proceed, make sure that you have a backup of your registry in case something goes wrong. You can use the built-in System Restore feature or a third-party tool to create a restore point.
Then, follow these steps to download and use the registry file to activate sound in safe mode:
Go to this link and click on the \"DOWNLOAD OPTIONS\" section on the right side of the page.
Select the \"ActivateSoundInSafeMode.reg\" file and save it to your PC.
Double-click on the downloaded file and click \"Yes\" when prompted by User Account Control.
Click \"Yes\" again when asked if you want to add the information to the registry.
Click \"OK\" when you see a confirmation message that the keys and values have been successfully added to the registry.
Restart your PC and boot into safe mode. You can do this by holding down the Shift key while clicking on the Restart option from the Start menu or the Power icon on the login screen.
Select \"Troubleshoot\" > \"Advanced options\" > \"Startup Settings\" > \"Restart\" from the recovery menu.
Press F4 or 4 on your keyboard to choose \"Enable Safe Mode\" or F5 or 5 to choose \"Enable Safe Mode with Networking\".
Once you are in safe mode, you should be able to hear sound from your speakers or headphones.
How to Undo the Changes and Disable Sound In Safe Mode
If you want to undo the changes and disable sound in safe mode, you can simply delete the registry keys and values that were added by the registry file. Here's how:
Open Registry Editor by pressing Windows + R keys on your keyboard, typing \"regedit\" in the Run box, and clicking \"OK\".
Navigate to the following location: HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\SafeBoot
Expand the \"Minimal\" and \"Network\" subkeys under SafeBoot.
Delete the following keys and values under both subkeys: AudioEndpointBuilder, Audiosrv, MMCSS, PlugPlay, PNP_TDI.
Close Registry Editor and restart your PC.
Boot into safe mode again and you will see that sound is disabled as before.
In this article, we have shown you how to activate sound in safe mode with a simple registry download. This can be useful if you need to hear audio while troubleshooting your PC in safe mode. However, keep in mind that modifying the registry can be risky, so always backup your registry before making any changes. We hope this article was helpful for you. If you have any questions or feedback, feel free to leave a comment below. 061ffe29dd